The Vermeer SC48TX stump cutter delivers high efficiency from engine to the stump grinding wheel through a 48-hp diesel engine with a direct drive system. This machine gives operators access to tight and challenging jobsites with a narrow footprint and low ground pressure to complete a variety of jobs. Plus, operators can add features like the remote control and backfill blade to help increase productivity.
| Manufacturer | Vermeer |
| Model | SC48TX Stump Cutter |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
| Oil Volume with Filter | 5.3qt (5L) |
| Oil Filter | Spin-on |
| Make and Model | CAT C1.7 T4F/Stage V |
| Maximum Angle of Continuous Operation | 35deg |
| Fan | 16.5 in |
| Coolant Capacity (Engine and Radiator) | 2.9gal (11L) |
| Clutch Type | Electric clutch with brake |
| Gross Horsepower (Maximum) | 48hp (35.8kw) |
| Cooling Medium | Water/antifreeze |
| Max Fuel Consumption | 2.9gph (11lph) |
| Fuel Tank Capacity | 14.5gal (54.9L) |
| Torque (Max) | 123ft-lb (166.8Nm) |
| Alternator | 85A |
| Recommended Oil | 10W-30 |
| Air Cleaner | Dry-type, restriction indicator, evacuator valve and safety element |
| Number of Cylinders | 3 |
| Fuel Type | Ultra-low sulfur diesel |
| Filtration Method | Full-flow 4-micron return filter, suction strainer |
| Recommended Oil Type | Vermeer highpower 68 |
| Pump Flow at Maximum RPM | 11gpm (41.6L/min) |
| System Type | Tandem gear pump, pressure balanced |
| Oil Cooler | Yes |
| Directional Control | Yes |
| Tank capacity | 9gal (34.1L) |
| System relief pressure | 2900psi (199.9bar) |
| Frame Description | Welded tube and plate steel |
| Brake Type | Spring-applied and hydraulically-released dual parking brakes |
| Control Station Description | Swing out |
| Operator Vision Shield Description | Abrasion-resistant coated polycarbonate |
| Radio Remote Control | Optional, wireless |
| Switches | Boom swing, boom height, creep propel, ignition, clutch, track gauge, track speed range and throttle, blade |
| Battery | 950 CCA |
| System Voltage | 12 |
| Display | Multifunction display (MFD) that displays hours, fuel level, engine speed, engine faults and engine status |
| Controller | Danfoss |
| Shutdown System | High engine temperature and low oil pressure |
| Warning Lights | Engine warning |
| Weight - Engine Option One | 3750lbs (1701kg) |
| Sound Power | 107 dB(A) |
| Length | 140in (355.6cm) |
| Width (tracks retracted) | 35in (88.9cm) |
| Width (tracks extended) | 49in (124.5cm) |
| Height (non-remote unit) | 76in (193cm) |
| Height (remote unit) | 85in (215.9cm) |
| Lower Gearbox | Straight bevel |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil |
| Oil Capacity - Lower Gearbox | 1.6qt (1.5L) |
| Driveshaft | 2 universal joints |
| Driveshaft - U Joints | 2 standard with double lip seal |
| Cutterwheel Speed | 1235rpm |
| Cutterwheel Thickness | 1.4in (3.5cm) |
| Number of Teeth | 27 |
| Tooth Description | Vermeer cutting system |
| Cutterwheel Guard | Standard |
| Reversible Pockets/Teeth | 24 |
| Cutterwheel Straight Line Dimension | 65in (165.1cm) |
| Cutterwheel Cut Above Ground | 28in (71.1cm) |
| Cutterwheel Cut Below Ground | 16in (40.6cm) |
| Chip Containment | 23cu ft (.7cu m) |
| Cutterwheel Diameter | 24in (61cm) |
| Number of wear plates | 6 |
| Track Type | Rubber 7-in width |
| Track Drive Pump Type | Tandem gear pump, pressure balanced |
| Number of Idlers | 7 |
| Type of Idler | Cast |
| Low Speed Travel | 1.1mph (1.8km/h) |
| Track Length on Ground | 47 in (119.4 cm) |
| Ground Bearing Pressure - Soft Ground | 5.7psi (39.2kPa) |
| High Speed Travel | 1.5mph (2.4km/h) |
| System Relief Pressure | 2900 psi |
| Radio Remote Control | Optional |
| Remote Display | LCD with remote control and machine functions status |
| Remote Range | 300 ft (91.4 m) |
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode and track speed range |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |
| Blade Travel Above Ground | 8.5in (21.6cm) |
| Chip blade width (without extensions) | 34in (86.4cm) |
| High Speed Travel | 140ft/min (42.7m/min) |
| Low Speed Travel | 100ft/min (30.5m/min) |
