This SC382 Vermeer stump cutter is equipped with a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine. The optimized cutting wheel on the SC382 gives this machine aggressive cutting capabilities. Along with standard four-wheel drive and the optional front blade, this model is the full package for stump cutting from start to finish.
| Manufacturer | Vermeer |
| Model | SC382 Stump Cutter |
| Category | Landscape, Rental, Tree Care |
| Price | Request a Quote |
| Year | 2024 |
| Oil Volume with Filter | 2.5qt (2.4L) |
| Oil Filter | Spin-on |
| Make and Model | Briggs & Stratton Vanguard EFI |
| Maximum Angle of Continuous Operation | 25deg |
| Clutch Type | Electric clutch with brake |
| Gross Horsepower (Maximum) | 37hp (27.6kw) |
| Cooling Medium | Air |
| Max Fuel Consumption | 3.2gph (12.1lph) |
| Fuel Tank Capacity | 10gal (37.9L) |
| Torque (Max) | 49ft-lb (66.4Nm) |
| Alternator | 20/50 amp (rpm-based) |
| Recommended Oil | 10W30 (See engine manual) |
| Air Cleaner | Dry-type safety element and restriction indicator |
| Number of Cylinders | 2 |
| Fuel Type | Gas |
| Filtration Method | 10 micron fill strainer and 6 micron return filter |
| Recommended Oil Type | Vermeer HyPower 68 |
| Pump Flow at Maximum RPM | 6.4gpm (24.2L/min) |
| System Type | Open-loop series system |
| Directional Control | Electric over hydraulic |
| Tank capacity | 6.5gal (24.6L) |
| Flow Control | SmartSweep |
| System relief pressure | 2470psi (170.3bar) |
| Frame Description | Welded tube and plate steel |
| Brake Type | Spring-applied, hydraulic release at rear motors |
| Fender Description | Yes |
| Degree of Oscillation | 12deg |
| Tires - Option One | 5.7"x 8" (14.5 x 20.3 cm) dual standard |
| Axle/Suspension | Rigid/fixed (rear) |
| Steerable Axle Type | Hydraulic steering, oscillating axle |
| Control Station Description | Fixed side location |
| Toolbox Description | Standard |
| Cutterwheel Shaft | 1.8" (4.8 cm) |
| Jackshaft Dimension | 1.3 |
| Number of Secondary Belts | 6 banded |
| Bearing Dimensions | 1.3 bore |
| Bearing Dimensions - Secondary Belt | 1.8" (4.8 cm) double spherical roller pillow block |
| Belt Type | V-belt |
| Number of Primary Belts | 2 individual (matched pair) |
| Jackshaft Bearing Type | Sealed ball |
| Weight - Engine Option One | 1950lbs (884.5kg) |
| Height | 53in (134.6cm) |
| Width | 50.1in (127.3cm) |
| Length | 118in (299.7cm) |
| Overall Width Transport (without duals) | 35.5in (90.2cm) |
| Weight With Chip Blade Option (Additional) | 85lbs (38.6kg) |
| Switches | Two-speed 2x4 and 4x4 ground drive, cutter wheel engage/disengage, creep, blade (if applicable) |
| Battery | 400 CCA |
| System Voltage | 12 V |
| Controller | Danfoss |
| Shutdown System | Engine low oil pressure |
| Warning Lights | Oil pressure, engine fault, operator presence status, clutch engage/disengage status |
| Cutterwheel Speed | 1560rpm |
| Cutterwheel Thickness | .5in (1.3cm) |
| Number of Indexes | 2 |
| Number of Teeth | 20 |
| Tooth Description | Yellow Jacket cutter system |
| Number of Pockets | 20 |
| Cutterwheel Guard | Standard |
| Reversible Pockets/Teeth | 20 |
| Cutterwheel Straight Line Dimension | 47in (119.4cm) |
| Cutterwheel Cut Above Ground | 24in (61cm) |
| Cutterwheel Cut Below Ground | 15in (38.1cm) |
| Chip Containment | 7.5cu ft (.2cu m) |
| Cutterwheel Diameter | 17in (43.2cm) |
| Chip Blade Dimension | Optional - 33" (83.8 cm) wide, 12" (30.5 cm) tall |
| Blade Travel Below Ground | 2.5in (6.4cm) |
| Blade Travel Above Ground | 8in (20.3cm) |
| High Speed Travel | 130ft/min (39.6m/min) |
| Low Speed Travel | 65ft/min (19.8m/min) |
